Cast Iron Fireplaces
Rust prevention, oil coating removal, and proper solid fuel recommendations.
Protective Oil Coating
All the cast iron products are delivered with a protective, oil-based coating on polished surfaces. This should be cleaned off during the installation.
Rust Prevention & Humidity
It is recommended that a spray-type oil is applied from time to time in order to avoid surface rust appearing. Ensure that the room in which the cast iron product is being installed is thoroughly dry. For example recently plastered walls cause high levels of moisture in the atmosphere and, as a result, rust is likely to occur. Under no circumstances should a water-based cleaner or polish be used to clean cast iron products.
Smoke-Free Zones & Approved Fuels
It is your responsibility to burn smoke free fuels if you live in a smoke free zone. There are some very high temperature burning fuels which can cause damage to any fireplace. Please refer to the Solid Fuel Association (www.solidfuel.co.uk) recommendations and use an approved coal merchant as your supplier. No responsibility can be accepted if high temperature fuels have been used or if there is excessive draft. If in doubt we recommend the use of a clay fire back.
Ash Clearing & Grate Maintenance
Clean ash away regularly as a build-up beneath the fire will cause the grate to burn out quickly. The grate is a consumable part of your fire and will need replacement from time to time, depending on the frequency and burning temperature of your fires.
Technical Helpline
All installations should be checked by competent HETAS or Gas Safe engineers to satisfy guarantee compliance.